ITI Electrician Tools Name with Images PDF

ITI Electrician Tools Name with Images PDF

ITI Electrician Tools Name with Images PDF Download for free using the direct download link given at the bottom of this article.

Electrical work can’t be done without the right tools. As basic tools have been improved over the years and new specialized tools are developed, the list of tool choices for electricians becomes even longer. Every electrician uses drills, but the type of tool needed varies with the application-what is essential for one worker isn’t necessarily needed by another. The power required depends on the material being drilled.

Manufacturers have made tools more ‘ergonomically correct,’ and improved designs help cut down on hand and wrist injuries often caused by repetitive movement. Plus, they make it easier to perform the same motion over and over because the tools just feel more comfortable. While today’s designs may provide more safety and comfort, they’re still the basic hand tools electricians have been using for years.

ITI Electrician Tools Name with Images PDF

ITI BASIC ELECTRICAL TOOLS

• Pliers
• Screw Drivers
• Drilling Equipment
• Sawing and Cutting Tools
• Soldering Equipment
• Hammers
• Measuring Tools
• Heavy duty screw driver 200 mm
• Electrician screw driver 250 mm thin stem insulated handle
• Punch centre 150 mm X 9 mm
• Knife double bladed electrician
• Neon tester
• Rule steel 300 mm
• Saw tenon 250 mm
• Hammer, cross peen 115 grams with handle
• Hammer ball peen 0.75 Kg. with handle
•  Firmer chisel wood 12 mm
• Gimlet 6 mm
• Bradawl
• Scriber 150 mm X Æ 4 mm (Knurled centre position)
• 20 Pincre 150 mm
• C. Clamps 200 mm, 150 mm & 100 mm
• Spanner 150 mm adjustable 15 degree
• Blow lamp 0.5 litre
• Melting pot
• Ladle
• Chisel cold firmer 25 mm X 200 mm
• Chisel 25 mm & 6 mm
• Drill machine hand 0 to 6 mm capacity
• Electric drill machine portable 6 mm capacity
• Pillar electric drill machine 12 mm capacity
• Allen key
• Oil can 0.12 litre
• Grease gun
• Outside micrometer 0 to 25 mm
•  Bench grinder motorized
• Rawl plug tool & bit
• Pulley puller
• Bearing puller
• Hygrometer
• Thermometer 0 to 100 Deg. Centigrade
• Scissors blade 150 mm
• Crimping tool
• Wire stripper 20 cm
• Chisel cold flat 12 mm
• Mallet hard wood 0.50 Kg.
• Hammer Exeter type 0.40 Kg.
• Hacksaw
• Square try 150 mm blade
• Divider 150 mm, Outside & Inside caliper
• Plier flat nose 100 mm
• Plier gas round nose 100 mm
• Plier gas 150 mm
• Tweezers 100 mm
• Snip straight 150 mm
• Drill hand brace 0 to 100 mm
• Plane, smoothing cutters, 50 mm
• Gauge, wire imperial
• File flat 200 mm 2nd cut
• Star Delta Starter with Manual, Semi-Auto & Automatic BENTEX
• Auto transformer type Starter
• Electrical Machine Trainer with Control Panel
• Motor – Generator Set (AC to DC)

You can download the Electrician Tools Name in PDF format using the link given below.